Create Windows 8 USB Bootable Using Windows 7 USB/DVD Download Tool

Create Usb Bootable Windows 8 :

1. Download and install Here :  Windows 7 USB/DVD 
2.  Run the Windows 7 USB/DVD Download Tool, and click on the Browse button

3. Klik Browse And Select the downloaded ISO file , and click on Open

 

If you don't have .iso files Create one by using this method Create Windows 8 iso files 

 4. And Then Klik Next

5. Connect a USB thumb drive, and click on the USB device button

 6. Select the drive letter of the USB thumb, and click on the Begin copying button.

 7. When finished, close the Windows 7 USB/DVD Download Tool.

And You are Done You Can Install Windows 8 Using USB Bootable

»»  Baca Selanjutnya...

Create Iso Files Windows 8 When "Install by creating media" Option is missing

What will you to do if you want create iso files and option Install by creating media is missing from windows 8 upgrade assistant

Here The Solution :

1. Close The Aplication Windows 8 Upgrade Assistand or Install Later from your dekstop
2. Download and install ImgBurn:ImgBurn is a utility that can be used to create a bootable installation DVD from a specified source or to create an .ISO file from a specified source and later use the .ISO file to create a bootable installation DVD.

Here :
Download 

 - Start ImgBurn and click on the ‘Create Image From files/folders’ option.

 - Click on the ‘Options’ tab and select the option shown in the screen shot.
Warning: Do not select the ‘Preserve Full Pathnames’ or the ‘Include Archive Files Only’ options. Set the ‘File System’ to UDF.

 

- Select the Source, use the Browse option: Navigate to C:\ESD\Windows\
Click on the ‘Windows’ subfolder and click on the ‘Select Folder’ button.

Folder C:\ESD\Windows  , Is Hidden Folder 

    To Show Hidden Files, Folders, and Drives
- Open folder option 

- Klik Tab View
- Choose Show hidden files, folders, and drives

- Unceck Hide protected operating system files box

- Then Click OK

After Show You can Continue

-  Select a Destination and Source

 - Click on the ‘Advanced’ tab, click on the ‘Bootable Disc’ tab and place a checkmark in ‘Make Image Bootable’ option. Emulation should be set to ‘None’.

- Next you need set the 'Boot Image' field to point to the 'etfsboot.com' file which is located in the C:\ESD\Windows\boot\ folder. Click on this file and then click on the ‘Open’ button.

 - In the Developer ID field enter: Microsoft Corporation. Finally change the ‘Sectors To Load’ value from 4 to 8.

- Next, click on the ‘Restrictions’ tab and set the ‘Folder/File Name Length’ to ‘Level X – 219 characters’. Place check marks in the following: Allow more than 8 directories, Allow more than 255 Characters In Path, Allow files Without Extensions and Don’t Add -1 Version Number To Files’.

- And Start the process

And Finish This Iso Will Show on  Destination :

Note : Using This !! Iso Already Support Bootable :D



Thanks :D

»»  Baca Selanjutnya...

Mengubah Tampilan .bashrc/Console Pada Terminal di Centos

Cuma Mau Share Mengubah Tampilan Pada Terminal .bashrc/console di Centos
kira - kira tampilannya kayak Gini :

Keren Kan .. Ane Cuma Bosan Dengan Tampilan Konsole vps ane  iseng2 ngubah di centos
Di Sini Saya Menggunakan Centos 5 32 ( x86 )

Begini Caranya :
1. Konek Ke terminal, kemudian Install Fortune dan Cowsay
    - wget http://pkgs.repoforge.org/fortune/fortune-1.0-37.1.el3.rf.i386.rpm
    - rpm -ivh fortune-1.0-37.1.el3.rf.i386.rpm
    - wget http://mirror.its.sfu.ca/mirror/CentOS-Third-Party/epel/5/i386/cowsay-3.03-4.el5.noarch.rpm
    - rpm -ivh cowsay-3.03-4.el5.noarch.rpm

Cowsay dan Fortune = Berfungsi buat tampillan gambar

2. Kemudian Install Figlet
Caranya :
 - wget http://pkgs.repoforge.org/figlet/figlet-2.2.2-1.el6.rf.i686.rpm
- rpm -ivh figlet-2.2.2-1.el6.rf.i686.rpm

Figlet = Berfungsi Buat Mengganti Style Pada Font

3. Jika Sudah Terinstall Semua Edit .bashrc yang akan di ubah misal di root jadi edit /root/.bashrc atau di user /home/namauser/.bashrc 
ingat mengeditnya terserah menggunakan software atau dari consolenya sendiri menggunakan perintah vi atau pico dan software pakai winscp / filezila kalau saya lebih mudah pake software 

Contoh :

# Modification Terminal
cowsay -f eyes "Selamat Datang di Server"
echo
#Figlet nama
figlet -f slant "Wendy Lidansyah" 

5. Save

Oke Segitu Doang Kok

Refrensi :
- http://zeestuff.wordpress.com/2011/11/26/seni-mengedit-file-bashrc-di-linux-dan-modifikasi-  terminal-anda/ 
- http://devilzc0de.org/forum/thread-9266.html?highlight=bashrc

»»  Baca Selanjutnya...

Trik Internet Gratis Oktober 2012 Telkomsel, Trhee, Indosat, XL

Nih Gan Yang Mao Trik Gratis Oktober 2012 

All Operator Udah Saya Rangkum Silahkan Donlot DIsini

Klik

»»  Baca Selanjutnya...